The self-circulating ultra-fine
Ceramic Roll Crusher
is tailored to the current metal mines that can not really achieve the crushing size of 5-8mm. The ultra-fine crusher uses a novel medium-pressure material layer cycle crushing theory. The capacity of medium hard ore stations from 14 to 16 can reach 25 tons, and the unit power consumption is only 1.8kwh.
1. The principle of the ultrafine crusher equipment is a novel theory of cyclic crushing of the medium pressure layer;
2. The ore is automatically and repeatedly broken in the crusher for many times, and the number of cycles is adjustable;
3, the crushing ratio is large, when the feed is -25mm, the ore discharge can reach about -4mm80%;
4. The equipment has low working pressure, only 20% of the high-pressure roller mill, and the equipment wear is relatively small, which is suitable for the crushing of hard ore;
5. The equipment is simple in structure and low in cost. It is only 30-40% of the high-pressure roller mill with the same processing capacity;
6. Water can be crushed to save a lot of energy;
7. Closed circuit with sieving and grading equipment, can replace a section of rod mill;
8. It can increase the processing capacity of subsequent grinding operations by about 20%, greatly reducing steel consumption and energy consumption, and improving production and economic benefits of the enterprise;
9. Compared with other current equipment for crushing metal ore, the successful development will fill the gap of domestic and foreign ultra-fine crusher equipment, and the market application prospect is very good.
