I believe many people know that when we are in the process of construction, what do we need to pay attention to today? Today I will briefly introduce this knowledge to everyone! The production capacity and use of geotextiles in recent years The amount showed a straight upward trend. With China's emphasis on the development of basic industries and the government's vigorous promotion of the application of geosynthetics, the development of geosynthetics in the future will be more rapid. The production of uniaxial plastic geogrid manufacturers can not only be based on quantity, but also on quality.

Speaking of its construction knowledge, you need to be careful. First of all, during the laying process, the soil must be solid to avoid uneven settlement, cracks, and the turf and tree roots within the impervious area should be removed uniaxial plastic geogrid for sale. Lay small-diameter sand or clay as the protective layer on the contact surface with the membrane. Secondly, in the process of laying, it is required that it cannot be pulled too tightly, and it is better to bury the two ends in the soil part into a corrugated shape, especially when anchored with rigid materials, there should be a certain amount of expansion . Only when it is laid, can it extend its service life and give full play to its performance when it is used.

The physical and mechanical properties such as breaking strength and puncture resistance have obvious advantages, which are 2 to 3 times higher than conventional products. Products with the same gram weight have a low specific gravity; they have good acid and alkali resistance and good hot-melt adhesion, good processability on site, and strong ability to adapt to various engineering conditions wholesale fiberglass geogrid. The components used in CRTSⅡtype slab ballastless track system can reduce the interaction between the track system and the bridge surface.

Scope of application: High-strength polypropylene staple fiber needle-punched geotextile is mainly used for the sliding layer between the CRTS Ⅱ slab ballastless track and the beam surface of the passenger dedicated railway and the geotextile material used for the isolation layer between the CRTS Ⅱ slab ballastless track and the friction. It is used in fields such as hydropower, highways, railways, ports, airports, sports venues, tunnels, coastal beaches, reclamation, environmental protection, etc. It plays the role of isolation, filtration, drainage, reinforcement, protection, and closure.